If you are using a Samsung SSD, then you might have to download and install the correct Samsung SSD Driver for your unit. Samsung's SSDs are a reliable storage solution that provides high performance, reliability, and a compact form factor. In this article, we'll go over how to install the right driver and update your Samsung SSD. In addition, we'll go over how to run a performance benchmark using your SSD.

Update Firmware on Samsung SSD

To update the firmware on a Samsung SSD, you need to first determine which model it is. This will allow you to download and install the proper firmware. Failure to do so can result in an insecure SSD and may require data recovery. 
To perform a firmware update, you should start by identifying the model by running the command sudo smartctl -a /dev/nvmxxx. The output will show the model of the SSD (Samsung SSD Driver). Then, prepare a bootable USB stick and boot the system from the USB stick. From there, search for the appropriate firmware for your Samsung SSD. Alternatively, you can download the latest version from the Samsung website.

If your SSD is unable to read the updated firmware, the device will need to be rebooted. In order to do this, you must press the BIOS key repeatedly. After the system reboots, you can install the updated firmware. 
Make sure that the software is compatible with your drive. If you encounter any problems, do not proceed further. Attempting to update the firmware on a Samsung SSD is not dangerous, but you should backup all your data before trying this step.

Install 950 PRO NVMe Driver

Before installing the new Samsung 950 PRO NVMe SSD, you must install the NVMe driver. The Samsung 950 PRO NVMe Driver is a piece of software that enables the computer to recognize and use the new storage device. This Samsung SSD Driver is available for Windows 10, 8.1, and Windows 7. If you are upgrading from a previous operating system, you can use the same driver to install the new Samsung 950 PRO NVMe SSD.
The Samsung 950 PRO NVMe SSD is designed to enhance computer performance and speed. However, it is important to install the latest driver for it to work properly. While there are many ways to download the latest Samsung SSD Driver, some of these sites can include unsafe and unwanted files. 
The Samsung website is one such source. After navigating the site, you can download the driver you need by clicking the download link below. There are some warnings about the file size, so you may want to be cautious.

Run a Performance Benchmark

A performance benchmark for your SSD drives can help you assess the performance of your SSD drives. The SSD driver installed on your system must support the features offered by the manufacturer. The driver should support the following features: 
Run a performance benchmark, check the health of your SSD, and manage your PC's settings. Run a performance benchmark for your SSD drives using the Samsung Magician software. The software allows you to customize the performance benchmark testing parameters. You can also change the number of threads used to run the benchmark.
The performance test tool enables you to run tests for your drive, including random and sequential read and write. It takes a few minutes to run and will display results in megabytes per second. You can also perform diagnostic scans to find potential problems and ensure that your drive is performing at its maximum capacity. 
Another feature you can choose is Over-Provisioning, which allows you to allocate a certain amount of disk capacity to available space. This feature improves the performance and lifespan of your drive.
  • Check Whether a Samsung NVMe SSD is Connected
If you want to check whether your Samsung NVMe SSD is connected to your computer, you need to do a few simple things. 
First, you need to ensure that the drive is connected correctly. If it is not, you should try a different cable. Another option is to use an M.2 SSD. It is connected to the motherboard via a slot. You can use a different computer to test whether the drive is connected properly.
If the problem persists, you should first try updating the driver for your Samsung NVMe SSD. To do this, open Device Manager and right-click on the Samsung NVMe controller. Then, click on the Update Driver button. 
Windows will automatically check for the latest driver. If it finds one, the Samsung NVMe controller should be connected. You will need to install the driver from the manufacturer's website.


File Name: Samsung SSD Driver
Size: 4.72MB
Version: V3.3
Supports: Samsung NVMe™ 970 EVO, SSD 970 PRO, 970 EVO Plus, 960 EVO, 960 PRO, and 950 PRO.
OS Support: Windows 7, Windows 8.1, and Windows 10 32-bit/64bit.
Memory & Processor: Intel Processor, 2GB RAM, 50MB Free Disk Space, and UEFI Bios v2.3. * Enhanced security for installation

Samsung SSD Driver V3.3 Latest Version